Product families

Four product families, four different device architectures.

Two are boxed, complete power units; two are open-frame OEM boards that go inside your device. All of them are our own design and our own build.

2complete power units

2OEM integration boards

200-240 V ACshared mains input

OEMadaptation on every product

Complete power unit

IPL POWER

The power source of hair removal and skin care devices built on IPL technology. It charges the capacitor and delivers the energy the xenon lamp needs for its light pulse.

Input: 200-240 V AC
Output: 200-400 V DC
Peak current: 400-600 A
Power: 1200-2000 W

2 models · IP-2000W600 · IP-1200W600

View product Request documents

Complete power unit

DIODE POWER

The power source of diode laser hair removal devices. It drives the laser module with a constant current, set from your own device controller.

Input: 200-240 V AC
Output: 22-32 V DC
Output current: 50-100 A
Power: 600-1200 W

4 models · 32 V / 24 V / 22 V · 50-100 A

View product Request documents

OEM integration board

EMS POWER

The power board of slimming and muscle-building devices built on EMS and HIFEM technology. It drives two coils independently, runs the pulse program and monitors coil temperature.

Channels: Dual, independent
Operation: Program-based
Feedback: Coil temperature
Form: Open frame

Single model · OEM engineering

View product Request documents

ND-YAG / Q-Switch open-frame power board

OEM integration board

ND-YAG / Q-SWITCH POWER

The power board of Q-switched ND-YAG tattoo removal and carbon peeling devices. It combines high-voltage charging, lamp triggering and safe discharge on one board.

Charging: High voltage
Trigger: Stable timing
Safety: Controlled discharge
Form: Open frame

Single model · OEM engineering

View product Request documents

Comparison

Four products, side by side

Values refer to the nominal configuration. The final operating point is verified together with the device architecture.

Feature	IPL POWER	DIODE POWER	EMS POWER	ND-YAG / Q-SWITCH
Form	Complete unit, enclosed	Complete unit, enclosed	Open-frame OEM board	Open-frame OEM board
Input	200-240 V AC · 50-60 Hz	200-240 V AC · 50-60 Hz	200-240 V AC	200-240 V AC
Output	200-400 V DC, adjustable	0-32 V DC, auto-adaptive	High-current pulse	High-voltage charging
Power	1200-2000 W	600-1200 W	Project-based	Project-based
Model options	2 models · 2000 W / 1200 W	4 models · 22-32 V · 50-100 A	Single model · OEM	Single model · OEM
Control	10-pin interface · 2.78-5.49 V	0-5 V analog / PWM	Program-based, dual channel	Integrated with system control
Protection	Current · heat · interlock	Overcurrent · overtemperature	Coil temperature feedback	Controlled safe discharge
Capacitor included	22000 µF / 450 V · 2 pcs at 2000 W, 1 pc at 1200 W	Not required	80 µF / 2000 V film · 1 pc	12000 µF / 450 V · 1 pc
Documents	CE · EMC · LVD · RoHS	CE · EMC · LVD · RoHS	Per project	Per project
Application	IPL / SHR hair removal	Diode laser hair removal	EMS / HIFEM body shaping	Tattoo removal, carbon peeling
Details	Go to page →	Go to page →	Go to page →	Go to page →

Selection guide

Which product suits you?

Start from the energy architecture of your device.

Does your device use a xenon flash lamp and a capacitor?

IPL POWER

Go to product

Do you need to drive a diode laser bar or stack?

DIODE POWER

Go to product

Are you doing body shaping with a magnetic coil?

EMS POWER

Go to product

Do you need Q-switched ND-YAG lamp triggering?

ND-YAG / Q-SWITCH

Go to product

There is more in our Alibaba.com storeBesides the four power families on this page, our full medical and aesthetic product groups are listed in the store.See every product

OEM

If none of these fit exactly, we adapt one for you.

Connector layout, enclosure dimensions, output values and firmware behaviour can all be changed to match your device architecture. Because the board is our own design, the change request stops with us.

Start an OEM request