About us
We develop power boards and complete power units for aesthetic and medical device manufacturers. Design, production, testing and technical support sit in the same team.
Who we are
Our products are developed and manufactured within ELECTROCOD Elektronik Yazılım Sanayi ve Ticaret Ltd. Şti., at our facility in the Mersin University Technopark. EC POWER is the brand that carries the power electronics side of that production.
Device manufacturers usually come to us with the same problem: the off-the-shelf power supply they bought does not quite meet the device's need, and where it falls short it cannot be changed. Because we design the board ourselves, a change request stops with us.
Today we have four product families, for IPL, diode laser, EMS/HIFEM and Q-switched ND-YAG systems. Two ship as enclosed complete units and two as open-frame boards that go inside the device.
Brand family
ELECTROCOD is our parent brand. EC POWER carries the power electronics side, while OMEGA DIODE carries the finished diode laser device side. All three work with the same R&D team and the same production facility.
Parent brand
electrocod.com
ELECTROCOD Elektronik Yazılım Sanayi ve Ticaret Ltd. Şti. develops electronic solutions for laser technologies: laser handpieces and bars, power modules, driver boards, sensor and cooling accessories. The two brands below sit under that roof.
Power electronics
ecpowersupply.com
This site. Power boards and complete power units for aesthetic and medical device manufacturers: IPL/SHR, diode laser, EMS/HIFEM and Q-switched ND-YAG systems. Design, production, testing and OEM adaptation are this brand's work.
You are here
Sub-brand · Diode laser
omegadiode.com
The group's finished device side. It builds diode laser hair-removal systems for clinics: the 808 nm OMEGA Gold and the four-wavelength OMEGA Titanium. Installation, operator training and technical support come with the device.
How we work
Because R&D, production, testing and support are not split across separate firms, responsibility stays in one place too.
Schematic, PCB layout and firmware are developed in our own laboratory. For a new product family, the test fixture is designed alongside the product.
Board assembly, mechanical assembly, wiring and packaging happen in our own facility. Because the line and R&D share a building, revisions are applied quickly.
Every board passes a functional test on our own fixture, and every unit is tested under load before shipping. The measurement is recorded against the serial number.
Integration questions are answered by the team that designed the board. Because the revision a unit shipped with is on record, a service conversation does not start with guesswork.
Our commitments
Board and spare part supply continues for older revisions even after the product family is updated. We stand behind the device you sold for as long as it stays in the field.
Every board revision and every unit's test measurement is recorded against a serial number. A fault reported years later is handled by reading that record.
Everything from connector layout to firmware behaviour can be adapted. You are not buying an off-the-shelf product; you are buying one tuned to your device.
Global market
The power units we manufacture at our facility in Mersin reach four regions through the device manufacturers we work with.
Facility
Tell us your device's power requirement; we will come back with a suitable product family, an integration plan and the documents.
Technical document
The manual is ready. Choose a language:
If the download did not start, click the button above. For technical questions, please use the contact form.